(fr) Activités reliés au développement d'applications, programmation, plateforme, gestion du code etc.
(en) Activities related to application development, programming, platform, code management etc..
جميع الأنشطة المتصلة تطوير التطبيقات والبرمجة ومنصة إدارة رمز، وما إلى ذلك.
Clone only the history leading to the tip of a single branch, either specified by the --branch option or the primary branch remote's HEAD points at. When creating a shallow clone with the --depthoption, this is the default, unless --no-single-branch is given to fetch the histories near the tips of all branches. Further fetches into the resulting repository will only update the remote-tracking branch for the branch this option was used for the initial cloning. If the HEAD at the remote did not point at any branch when --single-branch clone was made, no remote-tracking branch is created.
A Network software raid1Setting Up Network RAID1 With DRBD On Ubuntu 12.04
This tutorial shows how to set up network RAID1 with the help of DRBD on two Ubuntu 12.04 systems. DRBD stands for Distributed Replicated Block Device and allows you to mirror block devices over a network (like raid1 with 2 disks). This is useful for high-availability setups because if one node fails, all data is still available from the other node. 1 Preliminary Note
We use two servers (both running the same version of linux in our case Ubuntu 12.04): server1.cofares.net (IP address 192.168.10.100)server2.cofares.net (IP address: 192.168.10.101)
Both nodes have an unpartitioned second drive (/dev/sdb) with identical size (X GB) that I want to mirror over the network (network RAID1) with the help of DRBD.
It is important that both nodes can resolve each other, either through DNS or through /etc/hosts, /etc/hosts would be a better choice (our 2 servers are on the same switch and local. You can modify /etc/hosts on…
There are different articles on how to setup MySQL with SSL but it’s
sometimes difficult to end up with a good simple one. Usually, setting
up MySQL SSL is not really a smooth process due to such factors like
“it’s not your day”, something is broken apparently or the documentation